j ^s.mi-l.onaucto'i ij-^ 10 ducts., one, 20 stern ave. springfield, new jersey 07081 u.s.a. ultrafast recovery rectifier telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 MUR3030 features ? uiuaicjsi r\ei;uvery nme ? low forward voltage ? low leakage current ? 175c operating junction temperature ? high temperature glass passivated junction mechanical characteristics ? case: epoxy, molded ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds applications ? designed for use in switching power supplies, inverters and as free wheeling diodes. absolute maximum ratings(ta=25'c) symbol vrrm vrwm vr ip(av) ifrm ifsm tj tstg parameter peak repetitive reverse voltage working peak reverse voltage dc blocking voltage average rectified forward current (rated vr) peak repetitive forward current (rated vp.square wave,20khz) nonrepetitive peak surge current (surge applied at rated load conditions half-wave, single phase, 60hz) junction temperature storage temperature range value 300 30 30 300 -65-175 -65-175 unit v a a a 'c c 1 ' i 3 i so ^j ? o 1. 2 to-3pn package / 1 m> jftf 1 k ; ? b ? i dim a b c n e f h j k l n rj r s u y mm min 19.90 15.38 4.75 0.90 1.90 3.40 3,20 0.595 19.95 1.98 10.89 4.95 3.35 1.995 5.90 9.90 max 2:0.10 15.42 4.85 1.10 2.10 3.60 3.40 0.605 20.25 2.02 10.91 5.05 3.45 2.005 6.10 10.10 -n-* nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders. quality semi-conductors
ultrafast recovery rectifier MUR3030 thermal characteristics symbol rth j-c parameter thermal resistance.junction to case max 1.0 unit "c/w electricalcharacteristics(ta=25x:) (pulsetest: pulsewidth=300us,duty cycles2%) symbol vf ir trr parameter maximum instantaneous forward voltage maximum instantaneous reverse current maximum reverse recovery time conditions if= 30a vrrm= 300v if= 0.5a, ir= 1a, !?= 0.25a max 1.68 20 60 unit v ua ns
|
